Sony LF-B1 Operating Instructions (LF-PK1) - Page 7

Base Station Preparations Part 2 Attaching the Base Station Stand Part 3 Connecting Cable or Antenna To keep the base station stable, attach the base station stand. Notes • The SSID, WEP key, and initial password are printed on the side panel of the base station. You will need this information when you set up the base station and make wireless connections. Install the base station so that you can easily see the side panel. • Place the base station at least 10 cm away from the wall. The procedure for connecting to a TV antenna depends on the type of antenna jack. Some antenna jacks require a separate converter or splitter (not supplied). For more information, contact your Sony dealer. Rear of base station Antenna cable (not supplied) With the stand positioned so that the section labeled as FRONT is toward the front of the base station, insert the claws of the stand in the holes on the bottom of the base station and slide the stand toward the back of the base station to lock it into place. Holes to antenna FRONT Stand Claws 7