Sony STRDA3500ES Operating Instructions - Page 111
Operating without connecting to the TV, To set up the speakers
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
To set up the speakers Set "Sur Back Assign" to "BI-AMP" in the Speaker settings menu. The same signals output from the SPEAKERS FRONT A terminals can be output from the SPEAKERS SURROUND BACK terminals by setting "Sur Back Assign" to "BI-AMP". Notes • You cannot use the SPEAKERS FRONT B terminals for a bi-amplifier connection. • Set "Sur Back Assign" to "BI-AMP" before you perform Auto Calibration. • If you set "Sur Back Assign" to "BI-AMP", the speaker level, balance, and equalizer settings of the surround back speakers become invalid, and those of the front speakers are used. • Signals output from the PRE OUT jacks are used with the same settings as those of the SPEAKERS terminals. • If you set "Speaker Pattern" to a setting with surround back speakers, you cannot set "Sur Back Assign" to "BI-AMP". Operating without connecting to the TV You can operate this receiver using the display window if you do not use a GUI when a TV is not connected. Press GUI MODE to display "GUI OFF" in the display window. When "GUI MODE" is displayed in the display window, the menu is set to display on the TV screen using a GUI. Navigating through menus on the display window AMP Other Operations , V/v/B/b MENU 1 Press AMP. 2 Press MENU. 3 Press V/v repeatedly to select the menu you want. continued 111US