Sony STRDA3500ES Operating Instructions - Page 117
To operate on the receiver, To cancel Auto Calibration, To confirm/save Auto
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Performing Auto Calibration For details on the Auto Calibration, see "9: Calibrating the appropriate speaker settings automatically (Auto Calibration)" (page 44). See "Before you perform the Auto Calibration" (page 45) before performing the Auto Calibration. To operate on the receiver 1 Press GUI MODE repeatedly to select "GUI OFF". 2 Press AMP. Receiver operation is enabled. 3 Press MENU. 4 Press V/v repeatedly to select "", then press . 5 Press V/v repeatedly to select "A.CAL START", then press to start the measurement. Measurement starts in five seconds. A count down is displayed. Note While the time is counting down, stand away from the measurement area to avoid measurement error. 6 Measurement starts. The measurement process will take approximately 30 seconds. Wait until the measurement process completes. To cancel Auto Calibration The measurement will be canceled when you do the following: - Press ?/1, input buttons or MUTING. - Press SPEAKERS (OFF/A/B/A+B) on the receiver. - Change the volume level. - Connect the headphones. - Press GUI MODE. Tips • Operations other than turning the receiver on or off are deactivated during Auto Calibration. • In the following situations, the measurements may not be performed correctly or Auto Calibration cannot be performed. - when special speakers, such as dipole speakers are connected. - when the multi zone function is used in zone 2/ zone 3. To confirm/save Auto Calibration when GUI function is turned off 1 Confirm the measurement result. When the measurement ends, a beep sounds and the measurement result appears on the display window. Measurement Display Explanation result window When the measurement process completes properly COMPLETE Proceed to step 2. When the measurement process fails E- See "Message xxx:xx list after Auto Calibration measurement" (page 49). Other Operations continued 117US