Sony STRDA3500ES Operating Instructions - Page 95
Switching the zone setting of the remote, Operating the receiver from, another zone
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Switching the zone setting of the remote The remote commander is initially set to be used in zone 2. If you want to use it in zone 3, switch the zone setting of the remote. RM SET UP SHIFT ?/1 AMP ZONE 2, 3 ENT/ MEM Operating the receiver from another zone (ZONE 2/ZONE 3 operations) For details on the connections and settings of zone 2 and zone 3, see "Using Multi-zone Features" (page 90). The following operations are described for connecting an IR repeater and operating the receiver in zone 2 and zone 3. When an IR repeater is not connected, use this receiver in the main zone. ?/1 ZONE Input buttons Using Multi-zone Features 1 Press ?/1 while pressing RM SET UP. The AMP and ZONE buttons flash. 2 Press ZONE. The AMP button goes off, the ZONE button keeps flashing and the SHIFT button lights up. 3 Press the numeric button 2 for the zone 2, or 3 for the zone 3 while the ZONE button is flashing. The ZONE button lights up. 4 Press ENT/MEM. The ZONE button flashes twice and the remote switches to zone 2 or zone 3 mode. MASTER VOL +/- 1 Turn on the main receiver (this receiver). continued 95US