Sony STRDA3500ES Operating Instructions - Page 124
Programming the remote, To cancel programming, The numeric codes, corresponding to
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Programming the remote You can customize the remote to match the components connected to your receiver. You can even program the remote to control nonSony components and also Sony components that the remote is normally unable to control. The procedure below uses an example in which a VCR made by a company other than Sony is connected to the VIDEO 1 IN jacks on the receiver. AV ?/1 RM SET UP SHIFT TV Input buttons Numeric buttons ENT/MEM 1 While holding down RM SET UP, press AV ?/1. The RM SET UP button flashes. 2 While the RM SET UP button is flashing, press the input button (including TV) for the component you want to control. For example, if you are going to control a VCR connected to VIDEO 1 IN jack, press VIDEO1. The RM SET UP and the SHIFT buttons light up. The input button you selected (VIDEO1) flashes. If you press the button for a component of which you cannot program the remote, such as TUNER, PHONO, DMPORT or SOURCE, etc., the RM SET UP button keeps flashing. 3 Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control. The input button you selected in step 2 (VIDEO1) lights up. (The RM SET UP and SHIFT buttons remains lit.) Note For a TV remote code value, only numbers in the 500's are valid. 4 Press ENT/MEM. Once the numeric code has been verified, the RM SET UP button flashes twice and the remote automatically exits the programming mode. The input button lights off. To cancel programming Press RM SET UP during any step. The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one numeric code may be assigned to a component. If you fail to program your remote using one of the codes, try using other codes. Notes • The numeric codes are based on the latest information available for each brand. There is a chance, however, that your component will not respond to some or all of the codes. • All of the input buttons on this remote may not be available when used with your particular component. 124US