Sony STRDA3500ES Operating Instructions - Page 131

6 Press RM SET UP to finish the Learning function process. Tips • When the memory capacity for storing remote control codes reaches a certain limit, the RM SET UP button flashes 10 times, and then the learning process ends. • If the RM SET UP button flashes five times in step 1, and the learning process does not start, replace the batteries with new ones. To cancel learning Press RM SET UP. Also, not pressing any button for 60 seconds cancels the settings. Using a command that has been learned When selecting a learned input, press the button used to learn that function. To erase the learned code 1 While holding down RM SET UP, press THEATER. 2 Press the input button (VIDEO 1 in the example) for which you want to clear the setting. The input button flashes. (The RM SET UP button remains lit.) 3 Press ?/1 for more than 1 second. The input button flashes twice. 4 Press SHIFT, then press numeric buttons to clear the stored setting. The RM SET UP button flashes twice, then the clearing process is completed. When the clearing process fails, the RM SET UP button flashes five times. Try to perform the process again from step 2. Clearing all the contents of the remote's memory AV ?/1 ?/1 MASTER VOL - 1 Press and hold MASTER VOL - first, then press ?/1, then press AV ?/1. The RM SET UP button flashes three times. 2 Release all buttons. All the contents of the remote's memory (i.e., all the programmed data) are cleared. Using the Remote 131US