Sony STRDA3500ES Operating Instructions - Page 43

Getting Started 8: Setting the speakers Setting the speaker impedances Set the appropriate speaker impedance for the speakers you are using. 4 Press V/v repeatedly to select "Impedance", then press . GUI MODE , V/v/B/b MENU 5 Press V/v repeatedly to select "4 :" or "8 :" depending on the speakers you are using, then press . 1 Press GUI MODE repeatedly to select "GUI ON". The GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 Press V/v repeatedly to select "Settings", then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "Speaker", then press or b. Notes • If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often found on the back of the speaker.) • When you connect all speakers with a normal impedance of 8 ohms or higher, set "Impedance" to "8 :". When connecting other types of speakers, set it to "4 :". • When you connect front speakers to both the SPEAKERS A and B terminals, connect the speakers with a normal impedance of 8 ohms or higher. - When you connect speakers with impedance of 16 ohms or higher in both "A" and "B" configuration: Set "Impedance" to "8 :" in the Speaker settings menu. - For other types of speakers in other configurations: Set "Impedance" to "4 :" in the Speaker settings menu. 43US