Sony STRDA3500ES Operating Instructions - Page 96
Other Operations, Converting analog video input signals
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
2 Press ZONE. The remote switches to zone 2 or zone 3 mode. Change the zone setting of the remote to zone 2 or zone 3 in advance (page 95). 3 Turn on the amplifier in zone 2 or zone 3. 4 Press one of the input buttons on the remote to select the source signals you want to output. For zone 2, analog video and audio signals are output. For zone 3, only analog audio signals are output. When you select SOURCE, the signals of the current input are output. 5 Adjust to a suitable volume. • In the case of illustration 1-1 (page 91). Adjust the volume using MASTER VOL +/- on the remote. • In the case of illustration 1-2 (page 91), adjust the volume using the receiver of zone 2. • In case of illustration 2 (page 92), adjust the volume using the receiver of zone 3. Tips • Even when this receiver is in standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 and zone 3 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the multi function remote at the same time (SYSTEM STANDBY). • Only signals from components connected to the analog input jacks are output through the ZONE 2 OUT or ZONE 3 OUT jacks. No signals are output from components connected to only the digital input jacks. You cannot select some input according to the selected zone. • When SOURCE is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the ZONE 2 OUT or ZONE 3 OUT jacks even when the multi channel input is selected. Other Operations Converting analog video input signals This receiver allows you to convert the resolution of analog video input signals. RESOLUTION Press RESOLUTION repeatedly. Each time you press the button, the resolution of the output signals will be changed. You can also use "Resolution" in the Video settings menu. 96US