Sony STRDA3500ES Operating Instructions - Page 122
Using the Remote, Operating each component using the multi function remote
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Presetting satellite tuner channels 1 Select a channel you want to preset. For details on this operation, see "Selecting channels from a category (CATEGORY TUNING)". 2 Press SHIFT and then press ENT/MEM. "MEM" lights up on the display window. 3 Press PRESET + or PRESET - to select a preset number. You can also select the number by pressing the numeric buttons. Preset numbers from 1 to 30 are available. Channel 1 is preset for the preset numbers when you purchase the receiver. 4 Press ENT/MEM. 5 Repeat steps 1 to 4 to preset another station. Selecting a preset channel 1 Press TUNER repeatedly to select "XM RADIO" or "SIRIUS". 2 Press PRESET+ or PRESET - repeatedly to select the preset channel you want. You can also press SHIFT and then press the numeric buttons to select the preset channel you want. Then, press to enter the selection. You can also press TUNING MODE on the receiver repeatedly to select "PRESET", then turn TUNING +/- to select the preset channel you want. Using the Remote Operating each component using the multi function remote You can control Sony or non-Sony components you are using with the multi function remote supplied with the receiver. The remote is initially set to control Sony components. When you change the settings of the remote according to the components you are using, you can control non-Sony and other Sony components that the remote is initially unable control (page 124). Operating the components connected to the receiver 1 Press the input button that matches the connected component that you want to operate. 2 Press the appropriated buttons to use the function listed in the table below. Note You may not be able to operate some functions for the components you are using. 122US