Sony STRDA3500ES Operating Instructions - Page 58
Settings for the system (System settings menu), System settings menu
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
• AMP The HDMI audio signals from the playback component is only output to speakers connected to the receiver. The multi channel sound can be played back as it is. Note Audio signals are not output from the TV's speakers when "Audio Out" is set to "AMP". x 24p Auto Sound Sync (24p Auto Sound Sync) Lets you turn the "24p Auto Sound Sync" function on or off. This allows HD-D.C.S. to be selected as the optimum sound field automatically when 24p (24 frames per second) signal are input from a playback component, such as a Blu-ray disc player. • OFF • ON Note When "Control for HDMI" is set to "ON", the receiver detects the 24p signals via "BRAVIA" Sync. Therefore, if a player that is not compatible with "BRAVIA" Sync sends out 24p signals, the receiver will not switch the sound field to HDD.C.S. On the other hand, when "Control for HDMI" is set to "OFF", the receiver detects the 24p signals by itself. x Subwoofer Level (Subwoofer level for HDMI) Lets you set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently. • 0 dB • +10 dB • AUTO The subwoofer level is automatically set to 0 dB or +10 dB depending on the frequency. Settings for the system (System settings menu) You can use the System settings menu to customize the settings of the receiver. Select "System" in the Settings menu. For details on adjusting the parameters, see "7: Operating the receiver using the GUI (Graphical User Interface)" (page 40). System settings menu parameters x Screen Saver (Screen Saver) Lets you activate the screen saver function for the GUI menu on the TV connected to the receiver. • OFF The screen saver function is disabled. • ON When there has been no operation attempted for 15 minutes, the screen saver function is activated automatically. x Installer Mode (Installer Mode) Lets you select the control mode for maintenance and service. • OFF • RS232C x Language (Language) Lets you select the language for the GUI menu on the TV connected to the receiver. • English • Español • Français • Deutsch 58US