Sony STRDA3500ES Operating Instructions - Page 94
Multi Zone menu parameters, Press, to select, then press, repeatedly to, select item and parameter - - av receiver - 7 1 channel
UPC - 027242754355
View all Sony STRDA3500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
5 Press V/v to select "Zone2-ON"/"Zone3-ON" or "Zone2-OFF"/"Zone3-OFF", then press . 6 Press V/v/B/b repeatedly to select item and parameter, then press . Note You can only enjoy the sound in zone 3. Multi Zone menu parameters x Power Lets you turn zone operation on. • Zone2-ON or Zone3-ON • Zone2-OFF or Zone3-OFF x Input Lets you select the source that is output to the zone. You can output audio and video signals to zone 2 and only audio signals are output to zone 3. x Volume You can adjust the volume in the main zone. If "Sur Back Assign" is set to "ZONE2" in the Speaker setting menu, you can also adjust the zone 2 volume. x 12V Trigger You can turn the receiver on/off in another zone, or select various options for use of the 12V Trigger function, as explained below. • OFF Lets you turn off output of 12V triggers even when the main receiver is turned on. • CTRL Lets you turn the output of 12V triggers on or off manually using the CIS command of the external control device. • ZONE Lets you turn the output of 12V triggers on or off based on whether the selected zone is turned on or off. • INPUT (for "Main" only) Lets you turn on the output of 12V triggers when the preset input is selected. When you select "Input", the setting display which sets each input trigger to on/off appears. Press V/v to select the input, then press to check the box. Note You cannot select FM/AM/XM/SIRIUS/DMPORT in zone 3. Tips • Even when this receiver is in standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 or zone 3 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the multi function remote at the same time (SYSTEM STANDBY). • Only signals from components connected to the analog input jacks are output through the ZONE 2 OUT or ZONE 3 OUT jacks. No signals are output from components connected to only the digital input jacks. • When SOURCE is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the ZONE 2 OUT or ZONE 3 OUT jacks even when the multi channel input is selected. The analog audio signals of the current function are output. 94US