Toshiba Portege R500 Maintenance Manual - Page 119
Of Test Loop
View all Toshiba Portege R500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
3.2 Executing the Diagnostic Test 3 Tests and Diagnostics Select the option you want to execute and press Enter. When you select 1- SYSTEM TEST, the following message will appear: SYSTEM TEST NAME XXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS COUNT : XXXXX ERROR COUNT WRITE DATA : XX READ DATA ADDRESS : XXXXXX STATUS SUB-TEST MENU : 01 - ROM checksum 04 - Fan ON/OFF 05 - Geyserville 06 - Quick charge 07 - DMI read 99 - Exit to DIAGNOSTIC TEST MENU : XXXXX : XX : XXX NOTE: The menu displayed by your computer may be slightly different from the one shown above. Select the desired subtest number from the subtest menu and press Enter. The following message will appear: TEST LOOP : YES (or NO) ERROR STOP : YES (or NO) Use the right and left arrow keys to move the cursor to the desired option. Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle ends and restarts the test cycle. Selecting NO returns the process to the subtest menu after the test is complete. Use the up and down arrow keys to move the cursor to "ERROR STOP". Use the right and left arrow keys to move the cursor to the desired option and press Enter. PORTEGE R500 Maintenance Manual (960-634) [CONFIDENTIAL] 3-7