Toshiba Portege R500 Maintenance Manual - Page 174
Wireless LAN Test Program Intel-made b/g, a/b/g Setting up, of REF PC
View all Toshiba Portege R500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
3 Tests and Diagnostics 3.27 Wireless LAN Test Program (Intel-made b/g, a/b/g Setting up of REF PC) 3.27 Wireless LAN Test Program (Intel-made b/g, a/b/g Setting up of REF PC) For the test of Intel-made wireless LAN cards, configure the test environment as shown below with the following equipment. ・ AP (which can operate on Windows XP and is corresponding to access point 11a, 11b and 11g) NOTE: Set the SSID of AP as follows. (Note that upper case and lower case characters are recognized as different characters.) AP for check of 11a : 11aAP AP for check of 11b : 11bAP AP for check of 11g : 11gAP Make the security functions of AP (WEP, WPA, etc.) invalid. ・ REF (Reference) PC ・ Cross cable ・ DUT (Device Under Testing) DUT (Device Under Testing) Cross cable REF (Reference PC) 11a(b,g)AP Configuration of equipment for transmitting-receiving test How to setup the REF PC Set up the wireless LAN environment needed for the test before the start of Responder program on REF PC. 1. Copy the R100VWL5.ZIP (wireless LAN program for maintenance, common to Calexico, Golan and Kedron) to REF PC and unzip it. Then "Clx_Res" folder is created and the following three programs are copied in it. • PACKET.SYS • PACKET.INF • WTWINSVR.EXE 3-62 [CONFIDENTIAL] PORTEGE R500 Maintenance Manual (960-634)