Toshiba Portege R500 Maintenance Manual - Page 270

4 Replacement Procedures 4.21 Touch pad/Fingerprint sensor board 4.21 Touch pad/Fingerprint sensor board Removing the Touch pad/Fingerprint sensor board To remove the touch pad/fingerprint sensor board, follow the steps below and refer to Figure 4-33 and 4-34. 1. Turn over the middle frame and disconnect the TP cable from the connector on the touch pad board. 2. Disconnect the FP cable from the connector CN9810 on the fingerprint sensor board. 3. Turn the middle frame face up and remove the touch pad adhered with the doublesided tape. 4. Remove the touch pad button adhered with the double-sided tape while releasing the latches. Touch pad TP cable FP cable Touch pad button CN9810 Latch Touch pad board Fingerprint sensor board Figure 4-33 Removing the touch pad/fingerprint sensor board (1) 4-54 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)