Toshiba Portege R500 Maintenance Manual - Page 242
RTC battery
View all Toshiba Portege R500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
4 Replacement Procedures 4.11 RTC battery 4.11 RTC battery Removing the RTC battery To remove the RTC battery, follow the steps below and refer to Figure 4-14. 1. Disconnect the RTC battery cable from the connector CN9300 on the system board. 2. Remove the RTC battery holder fixed to the base cover with the double-sided tape. CAUTION: A cushion is fixed to the bottom of the RTC battery holder with a doublesided tape and the cushion is fixed to the base cover with a double-sided tape. When removing the RTC battery holder, be careful not to break the cushion of the bottom of the RTC battery holder. 3. Open the RTC battery holder while peeling adhered portion with the double-sided tape and remove the RTC battery from the RTC battery holder. CN9300 RTC battery holder RTC battery RTC battery cable Figure 4-14 Removing the RTC battery 4-26 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)