Toshiba T42F3F500XAMBN User Manual - Page 56

Run Switch Select, 19.5 Serial Com Station Address

Get Toshiba T42F3F500XAMBN PDF manuals and user guides View all Toshiba T42F3F500XAMBN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

TOSHIBA DISPLAY DURATION SET 30 MIN >Δ/∇: CHANGE DATA >ENTER:ACCEPT CHANGE Press the 'up' or 'down' arrow key to move the marker between the two available idle mode times. Press the ENTER key to save the change or press the MENU key to exit to the main menu and discard the change. Note: If any of the following conditions occur, the LCD-Idle Mode will be inhibited and the LCD will remain on continuously: 1) The UPS has received an EPO command. 2) The UPS is in Battery-Discharge Mode. 3) A fault has been detected in the main unit. 4) The UPS is in an overload condition. 6.19.4 Run Switch Select Press the MENU key to access the menu data screens and press the 'down' arrow key to scroll to the "Run Switch Select" setting screen display: RUN SWITCH SELECT REMOTE >*F1: DATA SET MODE >Δ/∇: PRV/NEXT SCREEN Press the F1 key to display the following active adjustment screen: RUN SWITCH SELECT REMOTE >Δ/∇: CHANGE DATA >ENTER:ACCEPT CHANGE Press the 'up' or 'down' arrow key to move the marker between the two "RUN SWITCH" selections Press the ENTER key to save the change or press the MENU key to exit to the main menu and discard the change. (Must have Remote Control option.) 6.19.5 Serial Com Station Address Press the MENU key to access the menu data screens and press the 'down' arrow key to scroll to the "Serial Comm Station Address" setting screen display: SER COM STATION ADDR STATION ADDRESS: 31H >*F1: DATA SET MODE > Δ/∇: PRV/NEXT SCREEN Press the F1 key to display the following active adjustment screen: SER COM STATION ADDR STATION ADDRESS: 31H >Δ/∇: CHANGE DATA >ENTER: ACCEPT CHANGE 4200FA CT/XT User's Manual 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
TOSHIBA
DISPLAY DURATION SET
<3 MIN>
30 MIN
>
Δ
/
∇
: CHANGE DATA
>ENTER:ACCEPT
CHANGE
Press the 'up' or 'down' arrow key to move the marker between the two available idle mode
times. Press the ENTER key to save the change or press the MENU key to exit to the main
menu and discard the change.
Note:
If any of the following conditions occur, the LCD-Idle Mode will be inhibited and the
LCD will remain on continuously:
1)
The UPS has received an EPO command.
2)
The UPS is in Battery-Discharge Mode.
3)
A fault has been detected in the main unit.
4)
The UPS is in an overload condition.
6.19.4 Run Switch Select
Press the MENU key to access the menu data screens and press the 'down' arrow key to
scroll to the “Run Switch Select” setting screen display:
RUN
SWITCH
SELECT
<LOCAL>
REMOTE
>*F1: DATA
SET
MODE
>
Δ
/
∇
: PRV/NEXT SCREEN
Press the F1 key to display the following active adjustment screen:
RUN
SWITCH
SELECT
<LOCAL>
REMOTE
>
Δ
/
∇
: CHANGE
DATA
>ENTER:ACCEPT
CHANGE
Press the 'up' or 'down' arrow key to move the marker between the two "RUN SWITCH"
selections Press the ENTER key to save the change or press the MENU key to exit to the
main menu and discard the change. (Must have Remote Control option.)
6.19.5 Serial Com Station Address
Press the MENU key to access the menu data screens and press the 'down' arrow key to
scroll to the “Serial Comm Station Address” setting screen display:
SER
COM
STATION
ADDR
STATION
ADDRESS:
31H
>*F1: DATA SET MODE
>
Δ
/
∇
: PRV/NEXT SCREEN
Press the F1 key to display the following active adjustment screen:
SER
COM
STATION
ADDR
STATION
ADDRESS:
31H
>Δ
/
∇
: CHANGE DATA
>ENTER: ACCEPT
CHANGE
4200FA CT/XT User’s Manual
55