Xerox 6180N DocuSP 61xx version 3.6 - Installation Planning Guide - Page 20

Select and prepare an installation site Table 4-1. Physical dimensions for the DocuTech 6100, 6115, and 6135 Total space requirement Refer to the following footprint diagrams Refer to following footprint diagrams Table 4-2. Physical dimensions for the DocuTech 6155 and 6180 Dimension Specification Width 180 inches (457 cm) Depth 36 inches (91 cm) Height 48 inches (122 cm) Weight 3227 pounds (1465 kg) NOTE: Ensure that the floor is level and strong enough to support the weight of the system. DocuSP Controller Stand (optional) 30 inches x 30 inches Total space requirement Refer to following footprint diagrams Room dimensions required for a single DocuTech installation The printer must be installed in a fixed location that provides the following clearance space: • 36 inches (910 mm) of clearance in back of each component. • 78 inches (1980 mm) of vertical clearance throughout the entire area. • 50 inches (1270 mm) of exclusive operator/service area in front of each component. • 33 inches (825 mm) to the left of the printer to accommodate the DocuSP controller with or without the stand. Single DocuTech system without an Interposer When installing a single DocuTech system without an Interposer, the clearance space shown in the following diagram must be maintained. 4-2 DocuTech 61xx Installation Planning Guide