Xerox 6180N DocuSP 61xx version 3.6 - Installation Planning Guide - Page 34

Select and prepare an installation site Heat management The DocuTech system produces significant amounts of heat when running in a production environment. The heat produced by the system must be planned for when selecting a suitable location for the system. This section contains the Heat Management Worksheets that should be completed if you have a DocuTech. It also includes the tables and figures that are used to complete the Heat Management Worksheets. Heat produced by selected components and systems The table below lists the amount of heat produced by some of the devices included as part of the DocuTech system. Table 4-6. Heat dissipation for the DocuTech printer and devices Device Heat dissipation Controller (Sun workstation) 683 BTU per hour Monitor 408 BTU per hour DocuTech printer (processor, interposer, finisher, and binder) Binder on: • 22,165 BTU per hour • 14,185 BTU per hour with heat vent kits Binder off: • 21,265 BTU per hour • 13,609 BTU per hour with heat vent kits Refer to the following sections for instructions on ways to calculate and handle the heat produced by the system. Heat production of selected systems The following table lists the heat output (BTU per hr.) for the Xerox 9900, 5090, 9700, and 9500 copiers, and for the Eastman Kodak 235, 250, and 300 copiers. 4-16 DocuTech 61xx Installation Planning Guide