Xerox 6180N DocuSP 61xx version 3.6 - Installation Planning Guide - Page 27

Select and prepare an installation site If passage or doorway A is: inches (mm) Table 4-3. Minimum passage widths Minimum passage B width must be: Finisher* Processor* inches (mm) inches (mm) Not separated (on casters) Separated (on casters) 29.0 (737) 30.0 (762) 31.0 (787) 32.0 (813) 34.0 (864) 36.0 (914) 38.0 (965) 40.0 (1016) 42.0 (1067) 55.5 (1410) 54.0 (1372) 52.0 (1321) 51.0 (1295) 47.0 (1194) 45.0 (1143) 43.0 (1092) 41.0 (1041) 39.0 (991) 83.0 (2108) 76.0 (1930) 73.0 (1854) 70.5 (1791) 66.5 (1690) 63.5 (1613) 61.5 (1562) 58.0 (1473) 55.0 (1397) 74.5 (1892) 64.5 (1638) 62.0 (1575) 59.5 (1511) 56.0 (1422) 53.0 (1346) 50.0 (1270) 48.0 (1219) 45.5 (1156) *The Finisher module is smaller than the separated Processor module. If there is sufficient passage width for the Processor module, there also will be sufficient clearance for the Finisher module. Electrical requirements This section describes the electrical requirements for installing one or more DocuTech printers. When selecting a location for the printer, the electrical requirements described in this section must be met. DocuTech 61xx Installation Planning Guide 4-9