Xerox 6180N DocuSP 61xx version 3.6 - Installation Planning Guide - Page 38
Room temperature change, Table 4-10. Calculate the room temperature
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Select and prepare an installation site Table 4-10. Calculate the room temperature 8a. The figure "Room temperature change (system replaced)" is used to estimate the change in room temperature when the DocuTech is added to a room. The figure is used to locate the appropriate change in room BTU per hr. Refer to the appropriate room airflow rate. Then, review the change that can be expected. 8a. Change in room temperature _____ ° F or ° C 8b. Add the number from step 2 to the result from step 8a. Compare the result with the maximum acceptable room temperature from step 3. NOTE: If this temperature change causes the room temperature to exceed the maximum acceptable room temperature, refer to the heat management alternatives. 8b. Maximum temperature plus change _____ ° F or ° C Figure 4-1. Room temperature change 4-20 DocuTech 61xx Installation Planning Guide