Xerox 6180N DocuSP 61xx version 3.6 - Installation Planning Guide - Page 32

Select and prepare an installation site Network hardware The Ethernet interface on the DocuSP controller is a 10/100 MB per sec twisted pair standard (10BaseT or 100Base T). Attachment Unit Interface (AUI) Coax Ethernet is enabled with an optional adapter cable. The Ethernet connection to the DocuSP controller must be compatible with the Institute of Electrical and Electronics Engineers (IEEE) 802.3 standard. Network protocols The DocuSP controller supports TCP/IP, IPX/SPX, Socket TCP/ IP, and EtherTalk Link Access Protocol (ELAP) protocols if the proper gateways are installed on the controller. NOTE: The DocuSP controller does not provide Novell server network services. If you plan to use the IPX/SPX protocol, you must have a Novell server installed on your network. Telephone requirements One telephone line is recommended where the DocuTech printer is installed. Customer support There will be times when the operator or administrator will need to read the screen information from the DocuSP controller dialogs to the customer support personnel. Therefore, it is necessary to provide a telephone in close proximity to the DocuTech system so that the operator or administrator can easily view the screen and operate the system while remaining on the telephone. Modem The installation of the modem requires that a dedicated telephone line is available at the DocuTech site. The telephone line specifications are: • Standard voice grade telephone line, 2-wire switched. • Dedicated, non-shared line. 4-14 DocuTech 61xx Installation Planning Guide