Yamaha DGX-500 Owner's Manual - Page 87
Using Initial Setup Send with a Sequencer, Select the Initial Setup Send operation.
View all Yamaha DGX-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
MIDI Functions Using Initial Setup Send with a Sequencer The most common use for the Initial Setup Send function is in recording a song on a sequencer that is intended for playback with the DGX-500/300. Essentially, this takes a "snapshot" of the DGX-500/300 settings and sends that data to the sequencer. By recording this "snapshot" at the start of the song (before any actual performance data), you can instantly restore the necessary settings on the DGX500/300. Provided there is a pause in the song, you could also do this in the middle of a song - for example, completely changing the DGX-500/300 settings for the next section of the song. I Sending Initial Setup Data 1 First, set up the sequencer for recording. The actual procedure may differ depending on your particular equipment and software. Ideally, you should leave two or more measures of silence (no performance data) before the song begins. The Initial Setup data should then be recorded to this space in the song. 2 Select the MIDI operations. Press the left Overall button, repeatedly if necessary, until MIDI is selected. 3 Select the Initial Setup Send operation. Press "2" on the numeric keypad to select operation #2, Initial Setup Send. If the INITSEND display appears instead of LOCAL in step #2 above, step #3 is unnecessary. INITSEND 4 Press the [START/STOP] button. Start the Initial Setup Send operation. 87