Yamaha HTR 6230 Owner's Manual - Page 24

Playback y • "NIGHT:CINEMA" and "NIGHT:MUSIC" adjustments are stored independently. Notes • You cannot use the night listening modes in the following cases: - when the component connected to the MULTI CH INPUT jacks is selected as the input source. - when headphones are connected to the PHONES jack. - when the sampling frequency of the input sources are higher than 48 kHz. • The effect of night listening modes may vary depending on the input source and surround sound settings you use. ■ Displaying the input source information (SIGNAL INFO) You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal. 1 Press hAMP and then press kMENU on the remote control. "BASIC SETUP" appears on the front panel display. ;BASIC SETUP 2 Press lk / n repeatedly to select "SIGNAL INFO" and then press lENTER. 3 Press lk / n to switch the displayed information. The following information about the input source appears on the front panel display. Choice FORMAT SAMPLING CHANNEL BITRATE FLAG Description Signal format. The number of samples per second taken from a continuous signal to make discrete signals. The number of source channels in the input signal (front/surround/LFE). The number of bits passing a given point per second. Flag data encoded in DTS, Dolby Digital, or PCM signals that cue this unit to automatically switch decoders. 4 Press kMENU on the remote control again to exit from "SET MENU." ■ Using the sleep timer Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording from a source. Press hAMP and then press xSLEEP repeatedly to set the amount of time. The sleep timer setting changes as follows. SLEEP 120min SLEEP 90min SLEEP OFF SLEEP 30min SLEEP 60min Once the sleep timer is set, the SLEEP indicator lights up on the front panel display, and the display returns to the selected sound field program. To cancel the sleep timer Press xSLEEP on the remote control repeatedly to select "SLEEP OFF." y • If you set the main zone to the standby mode, the sleep timer is automatically canceled. ■ Playing video sources in the background You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor. Press the input selector buttons (f) on the remote control to select a video source and then an audio source. CD MD/CD-R TUNER DVD DTV/CBL DVR V-AUX/DOCK Audio sources Video sources DVD DTV/CBL DVR V-AUX/DOCK Video sources MULTI CH IN 9 Audio sources 20 En