Yamaha HTR 6230 Owner's Manual - Page 32

FM/AM tuning y • You can select the preset station group and the preset station number where the first received station will be stored by pressing EA/B/C/D/E and then FPRESET/TUNING l / h. Notes • Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number. • Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune it manually and store it as described in "Manual station preset" on this page. Manual station preset Use this feature to store the FM or AM stations manually. 1 Tune into a station. See page 27 for using instructions. 2 Press HMEMORY. The MEMORY indicator flashes on the front panel display for approximately 30 seconds. 3 Press EA/B/C/D/E and FPRESET/TUNING l / h repeatedly to select a preset station group and number (A1 to E8) while the MEMORY indicator is flashing. Check that the colon (:) appears on the front panel display. • To select a higher preset station group and number, press FPRESET/TUNING h. • To select a lower preset station group and number, press FPRESET/TUNING l. Flashes C3:AM 630 TUNED MEMORY kHz Preset station group and number 4 Press HMEMORY while the MEMORY indicator is flashing. The station band and frequency appear on the front panel display with the preset station group and number you have selected. TUNED C3:AM 630 kHz The displayed station has been stored as C3. Selecting preset stations You can tune into any desired station simply by selecting the preset station group and number under which it is stored. When performing this operation with the remote control, press fTUNER to select "TUNER" as the input source. 1 Press EA/B/C/D/E (or ll / h) repeatedly to select the desired preset station group (A to E). The preset station group letter appears on the front panel display and changes each time you press the button. 2 Press FPRESET/TUNING l / h (or lk / n) to select the desired preset station number (1 to 8). The preset station group and number, along with station band and frequency, appear on the front panel display. E1:FM 87.5 MHz y • You can select the desired preset station number (1 to 8) directly by pressing the numeric buttons (y). Exchanging preset stations You can exchange the assignments of two preset stations between the two. The example below describes the procedure to exchange preset station "E1" and "A5." 1 Select preset station "E1" using EA/B/C/D/E and FPRESET/TUNING l / h. See "Selecting preset stations" on this page. 2 Press and hold DEDIT PRESET/TUNING for more than 3 seconds. "E1" and the MEMORY indicator flash on the front panel display. Flashes MEMORY E1:FM 87.5 MHz Flashes 3 Select preset station "A5" using EA/B/C/D/E and FPRESET/TUNING l / h. "A5" and the MEMORY indicator flash on the front panel display. See "Selecting preset stations" on this page. Flashes MEMORY A5:FM 90.5 MHz Flashes 4 Press DEDIT PRESET/TUNING again. "EXCHANGE E1-A5" appears on the front panel display and the assignments of the two preset stations are exchanged. 28 En