Yamaha PSR-330 Owner's Manual - Page 61

,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQRev,,QQoicin,,QQg ,,QQ 2 If Necessary Select a Voice to Revoice Use the three rightmost TRACK buttons to select the voice you want to revoice: L, R2, or R1. A frame will appear around the icon of the selected voice. MELODY MELODY MELODY MELODY ACCOM- VOICE VOICE VOICE 1 2 3 4 PANIMENT L R2 R1 • The TRACK button below the selected voice can be used to turn the voice on or off. Make sure that the voice is turned on if you want to monitor the sound while revoicing (the R1 voice cannot be turned off). TRACK 3 Select and Edit the Revoice Parameters Use the SUB MENU [v] and [w] buttons to select the desired parameter. The name of the selected parameter will appear on the top line of the display to the right of the parameter's current value. Use the [+] and [-] or number buttons to set the parameter's value as required. Refer to the "Revoice Parameters" chart on page 58. 001 GrandPno 100 Volume 0 Octave 0 Pan 100 RevSndLv 4 Repeat as Required and Exit When Done Repeat steps 2 and 3, above, to revoice the voices as required, then press the [REVOICE] button so that its indicator goes out to exit from the REVOICE mode. REVOICE • You can jump directly to the REVOICE R2 VOICE display by pressing and holding the [DUAL VOICE] button for a few seconds. • You can jump directly to the REVOICE L VOICE display by pressing and holding the [SPLIT VOICE] button for a few seconds. • If the Voice Set function is turned on (page 65) the R1, R2, and L voice parameter settings may be changed when a different R1 panel voice is selected, thus the REVOICE settings will be lost. Turn off the Voice Set function if you do not want this to occur. • Minus settings for the Octave and Pan parameters can be directly entered by pressing the appropriate number button while holding the [-] button. • The REVOICE mode will automatically be exited if the MENU [v] and [w] buttons are used to select any of the menus to the left of the display, or if the [CARTRIDGE] button is pressed. • Save any revoice settings you want to keep to the PSR-330 REGISTRATION MEMORY (page 39). The revoice setting are temporary and will be lost if the power is turned off, a different R1 panel voice is selected while the Voice Set function is on, or a REGISTRATION MEMORY is recalled. 59