Yamaha RX Z9 MCXSP10 Manual - Page 20

SPEAKER SETUP ■ FRONT terminals Connect one or two speaker systems to these terminals. If you use only one speaker system, connect it to either of the FRONT A or B terminals. Note The Canada model cannot output to two separate speaker systems simultaneously. Bi-wired connection The unit also allows you to make bi-wired connections to one speaker system. Use two pairs of speaker cables for each speaker (one pair for the woofer and one pair for the tweeter/mid-range). To use the bi-wired connections, press SPEAKERS A and SPEAKERS B on the front panel so that both SP A and B light up on the front panel display. Bi-wired connection ■ PRESENCE/ZONE 2 terminals Connect presence speakers to these terminals. You can also use these terminals for connecting Zone 2 speakers (see page 101). Note The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields are selected. This unit ■ CENTER terminals Connect a center speaker to these terminals. ■ SURROUND terminals Connect a surround speaker system to these terminals. ■ SUBWOOFER jacks Connect one or two subwoofer(s) with built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to the jack(s). ■ SURROUND BACK terminals Connect a surround back speaker system to these terminals. If you only connect one surround back speaker, connect it to the left (L) terminals. 16