Yamaha RX Z9 MCXSP10 Manual - Page 39
For Equalizing, select, Once you have selected the desired setting - test
UPC - 027108918204
View all Yamaha RX Z9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
PREPARATION For Equalizing, select: Skip Flat Front Low Mid High To skip the selected item and perform no adjustments. To average the frequency response of all speakers. Recommended if all of your speakers are of similar quality. To adjust the frequency response of each speaker in accordance with the sound of your front speakers. Recommended if your front speakers are of much higher quality than your other speakers. To average the frequency response of all speakers, giving priority to the accuracy of bass frequencies. To average the frequency response of all speakers, giving priority to the accuracy of midrange frequencies. To average the frequency response of all speakers, giving priority to the accuracy of high frequencies. 5 Once you have selected the desired setting, press l to move back to Setup Menu. AUTO SETUP 7 Press n to select Start, then press ENTER. Loud test tones are output from each speaker and "Measuring" appears during the auto setup procedure. • To pause the auto setup procedure, press one of the cursor buttons (k/n/l / h) or ENTER. In the pause mode, press k to RETRY the procedure, l to cancel auto setup, or n to skip to the next item without completing the current procedure. • If "E10:Internal Err" appears during testing, restart the procedure from step 3. • If "E12:No Speaker" appears on the GUI display after the Wiring check, all 9 speakers and 2 subwoofers are not connected. If you did connect all of the speakers and subwoofers, first check the physical connections, then press ENTER, and then k (RETRY) to re-try the Wiring check. 6 Press n to select Setup Type, then select: Auto Step To automatically perform the entire auto setup procedure. To pause for confirmation between each check in the auto setup procedure. English 35