Yamaha RX Z9 MCXSP10 Manual - Page 42
After auto setup, Warning message, Cause, Remedy - problems
UPC - 027108918204
View all Yamaha RX Z9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
AUTO SETUP After auto setup The following warning messages are displayed after analysis is complete to inform you of possible problems. We recommend that you check the contents of each message, then select Retry to try the auto setup procedure again. Warning message W1:Out of Phase W2:Over24m/80ft W3:Level Error Cause Remedy Speaker polarity is incorrect. This message may • Check the speaker connections. appear depending on the speakers even when they are connected correctly. The distance between the speaker and the listening position is over 24 m (80 ft). • Bring the speaker closer to the listening position. The difference in volume level between the speakers is excessive. (No level correction is made.) • Readjust the speaker installation. • Check the speaker connections. • Use speakers of similar quality. • Adjust the output volume of the subwoofer. 38