Yamaha RX Z9 MCXSP10 Manual - Page 44
Select a sound field program if desired., To listen with headphones SILENT CINEMA, To adjust the tone
UPC - 027108918204
View all Yamaha RX Z9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
PLAYBACK 7 Select a sound field program if desired. Press DSP PROGRAM then rotate MULTI JOG (or on the remote control, set 10KEY/AMP to AMP, then press one of the sound field program buttons repeatedly) to select a sound field program. (See page 55 for details about sound field programs.) DSP PROGRAM MULTI JOG or Front panel 10KEY AMP STEREO 1 JAZZ 5 6.1/5.1 CHP/INDEX MOVIE 9 HALL#1 2 ROCK 6 THX 0 HALL#2 3 CHURCH 4 MUSIC ENTERTAIN 7 8 /DTS +10 NIGHT +100 Remote control Note When this unit detects Dolby Digital signals, the following display appears for a few seconds. This shows how the signal level is being corrected to become -27 dB (THX recommendation). DialNorm;;+4dB To listen with headphones (SILENT CINEMA) The SILENT CINEMA mode allows you to enjoy multichannel music or movie sound, including Dolby Digital and DTS surround, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs. The "SILENT CINEMA" indicator lights up on the front panel display. (If the sound field programs are off, you listen with normal stereo reproduction.) To adjust the tone You can adjust the bass/treble balance for the front left/right, MULTI JOG center and subwoofer channels. Press TONE CONTROL TONE CONTROL repeatedly on the front panel to select Treble or Bass. Select Treble, then rotate MULTI JOG to the right or left to increase or decrease the high-frequency response. Select Bass, then rotate MULTI JOG to the right or left to increase or decrease the low-frequency response. To cancel the tone control, press TONE CONTROL repeatedly to select OFF. Notes • If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left/right and center speakers. • TONE CONTROL is not effective when: - The THX (page 55) or DIRECT STEREO (page 45) program is selected. - PURE DIRECT is selected. • If headphones are connected to this unit, the Tone Control setting adjusts the bass/treble balance of your headphones (page 69). To mute the sound Press MUTE on the remote control. "MUTE" blinks in the front panel display. MUTE To resume the audio output, press MUTE again (or press VOLUME +/-). "MUTE" disappears from the display. y • You can adjust the muting level (see page 71). • You can also perform this operation using the GUI remote control (see page 31). 40