Yamaha YSP800S Owner's Manual - Page 68

MANUAL SETUP Using MANUAL SETUP Use the remote control to access and adjust each parameter. 3 Press / to select MANUAL SETUP and then press ENTER. The following screen appears on your TV. YSP 5BEAM 1 STEREO 4 INPUTMODE SLEEP ST+3BEAM 2 TARGET 5 3BEAM 3 6 MUSIC 7 MOVIE 8 VOL MODE 9 SPORTS 0 OFF +10 SURROUND CH LEVEL CINEMA DSP MENU TEST ENTER RETURN y You can adjust the SET MENU parameters while the unit is reproducing sound. 1 Press YSP on the remote control to switch to the operation mode of this unit. ENTER ENTER ;MANUAL SETUP . 1 SOUND MENU 2 BEAM MENU 3 INPUT MENU 4 DISPLAY MENU [ ]/[ ]:Up/Down [ENTER]:Enter 4 Press / to select a sub menu and then press ENTER. YSP ENTER ENTER p p p p 2 Press MENU on the remote control. The SET MENU screen appears on your TV. MENU SET MENU . ;MEMORY ;AUTO SETUP ;BASIC SETUP ;MANUAL SETUP [ ]/[ ]:Up/Down [ENTER]:Enter 5 Press / / / and ENTER to configure each parameter. ENTER y • The control buttons used for SET MENU are displayed on the bottom of the screen. • To return to the previous screen while using SET MENU, press RETURN on the remote control. • To resume cursor button operations after changing the control area by pressing an input selector button, press TEST on the remote control. • To cancel the SET MENU screen, press MENU once more. • You can also perform the following operations in the front panel display. • If you press an input selector button during the SET MENU operations, the cursor buttons become ineffective. In this case, press TEST once. 6 Press MENU to exit. The OSD disappears from your TV screen. MENU 64