Yamaha YSP800S Owner's Manual - Page 89

Using the TV macro The TV macro feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a DVD, you would normally turn on the component, select DVD as the input source and press the play button to start playback. The TV macro feature lets you perform all of these operations simply by pressing the DVD macro button. Notes • The ways to set macros differ if your TV does not have the tuning capability. • If you press any control buttons on the remote control other than the ones used to set macros while setting macros, the setting procedure is automatically canceled. • If it takes more than 10 seconds in steps 2 and 3, the setting procedure is automatically canceled. In this case, repeat from step 1. REMOTE CONTROL FEATURES ■ Setting macros for the TV with the tuning capability 1 Press and hold CODE SET on the remote control and then press one of the input selector buttons to select the input source you want to set macros for. Proceed to step 2 while holding down CODE SET. TV MUTE CODE SET DVD VCR STB TV AUX 2 Press MACRO on the remote control while holding down CODE SET. TV MUTE MACRO STANDBY/ON POWER POWER AV TV CODE SET DVD AUX VCR INPUT1 STB TV INPUT2 TV MACRO YSP 5BEAM 1 STEREO 4 MUSIC 7 INPUTMODE SLEEP ST+3BEAM 2 3BEAM 3 TARGET 5 6 MOVIE 8 VOL MODE 9 SPORTS 0 OFF +10 SURROUND CH LEVEL CINEMA DSP MENU 3 Press CH +/- or the numeric buttons to select the TV channel. Check that the TV screen changes to the tuner screen. 5BEAM ST+3BEAM 3BEAM CH 1 2 3 STEREO TARGET 4 5 6 or MUSIC MOVIE VOL MODE 7 8 9 SPORTS 0 OFF +10 CINEMA DSP TEST ENTER RETURN VOLUME CH TV VOL 4 Press TV INPUT on the remote control repeatedly so that the screen changes to the display of the input source selected in step 1. TV INPUT MUTE TV INPUT TV MUTE CODE SET 5 Press ENTER on the remote control to confirm the macro setting. ENTER ADVANCED OPERATION English 85