Yamaha YSP800S Owner's Manual - Page 73

p p p SOUND MENU Use to manually adjust various parameters related to the sound output. SET MENU → MANUAL SETUP → SOUND MENU 1 SOUND MENU . A)TONE CONTROL B)BEAM LEVEL C)SUBWOOFER SET D)MUTE LEVEL E)AUDIO DELAY F)ROOM EQ G)DD/DTS Dynamic Range [ ]/[ ]:Up/Down [ENTER]:Enter ■ TONE CONTROL (Tone control) You can adjust the tonal quality of your speakers. p p A)TONE CONTROL . TREBLE;;;;0dB - + BASS;;;;;;0dB p [ ]/[ ]:Up/Down[ ]/[ ]:Sel [ENTER]:Return TREBLE (Treble) Use to adjust the high frequency response. Choices: -12 dB to +12 dB Initial setting: 0 dB BASS (Bass) Use to adjust the low frequency response. Choices: -12 dB to +12 dB Initial setting: 0 dB p p MANUAL SETUP ■ BEAM LEVEL (Beam level) Use to manually balance the speaker levels between the front left or surround left speakers and each speaker selected. When setting the front right, center or surround left speakers or the subwoofer, the test tone is output from the front left speakers and the selected speaker position. When setting the surround right speaker, the test tone is output alternately from the surround left and right speakers. The factory default value is automatically set for this parameter depending on the parameters set in AUTO SETUP, BASIC SETUP or ROOM EQ in MANUAL SETUP. Depending on the beam mode settings, some channels may not be available for selection. In this case, NONE is displayed. B)BEAM LEVEL - + . FR C SL SR SWFR *OUT : FL )FR *MODE: 5 BEApM [ ]/[ ]:Up/Down[ ]/[ ]:Sel p [ENTER]:Return • FR adjusts the balance of the front left and front right speakers. • C adjusts the balance of the front left and center speakers. • SL adjusts the balance of the front left and surround left speakers. • SR adjusts the balance of the surround left and surround right speakers. • SWFR adjusts the balance of the front left speaker and subwoofer. ADVANCED OPERATION English 69