Yamaha YSP800S Owner's Manual - Page 93
ADDITIONAL, INFORMATION, English, components with this unit's
UPC - 027108923543
View all Yamaha YSP800S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
■ Remote control TROUBLESHOOTING Problem Cause Remedy The remote control does not work and/or function properly. You cannot operate external components with this unit's remote control. The cursor buttons do not work during SET MENU operation. Wrong distance or angle. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. The external component you want to operate is not selected as the input source. The remote control code was not correctly set. Even if the remote control code is correctly set, there are some models that do not respond to the remote control. You pressed an input selector button. The remote control will function within a maximum range of 6 m (20 ft) and no more than 30 degrees off-axis from the front panel. Reposition this unit. Replace all batteries. Press INPUT on the front panel or the input selector buttons on the remote control to select the external component you want to operate. Set the remote control code correctly or try another code for the same manufacturer using the "LIST OF REMOTE CONTROL CODES" at the end of this manual. Use the remote control supplied with the external component. Press TEST once. See page 22 - 22 37 82 - - ADDITIONAL INFORMATION English 89