2008 Acura RL Owner's Manual - Page 228

Main Menu Table Of Contents Audio System Loading Discs in the Changer To load multiple discs in one operation: 1. Press and hold the LOAD button on the changer unit until you hear a beep. You will see ''BUSY'' on the upper display, and the disc load indicator turns red and starts blinking. 2. Insert the disc into the disc slot when the disc load indicator turns green and ''LOAD'' appears in the upper display at the same time. Insert it only halfway; the drive will pull it in the rest of the way. You will see ''BUSY'' on the upper display, and the disc load indicator turns red again and blinks as the disc is loaded. 3. When the disc load indicator turns green and ''LOAD'' appears on the upper display again, insert the next disc in the slot. Do not try to insert a disc until ''LOAD'' appears. You could damage the audio unit. 4. Repeat steps 1 through 3 until all six positions are loaded. If you are not loading all six positions, press the LOAD button again after the last disc has loaded. If you stop loading discs before all six positions are filled, the system will wait for 10 seconds, stop the load operation, and begin playing the last disc loaded. To load a single disc: 1. Press and release the LOAD button on the changer unit. You will see ''BUSY'' on the upper display, and the disc load indicator turns red and starts blinking. 2. Insert a disc into the disc slot when the disc load indicator turns green, and ''LOAD'' appears on the upper display at the same time. Insert the disc only about halfway; the drive will pull it in the rest of the way. You will see the disc number blinking on the upper display, and the disc load indicator turns red again and blinks as the disc is loaded. Do not try to insert a disc until ''LOAD'' appears. You could damage the audio unit. 3. You will see ''DISC READ'' on the upper display, then the system begins to play the disc. Features CONTINUED 2008 RL 225