2008 Acura RL Owner's Manual - Page 441
2008 Acura RL Manual
Page 441 highlights
Main Menu Table Of Contents Changing a Flat Tire BRAKE HUB 10.Before mounting the spare tire, wipe any dirt off the mounting surface of the wheel and hub with a clean cloth. Wipe the hub carefully; it may be hot from driving. 11.Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten the wheel nuts fully. 12.Lower the vehicle to the ground, and remove the jack. 438 2008 RL
Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
Lower the vehicle to the ground,
and remove the jack.
10.
11.
12.
Changing a Flat Tire
438
BRAKE HUB
2008
RL