2008 Acura RL Owner's Manual - Page 416
2008 Acura RL Manual
Page 416 highlights
Main Menu Table Of Contents Lights BOLTS 5. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 6. Push the electrical connector back onto the bulb. Make sure it is on all the way. 7. Turn on the fog lights to test the new bulb. 8. Reinstall the two undercover bolts on the side under cover and tighten them securely. Put the holding clip back on the side under cover and push on the center until it locks (the center is flush with the head). BULB CLIP CONNECTOR 1. Use a Phillips-head screwdriver to remove the two undercover bolts, and remove the holding clip with a flat-tipped screwdriver. 2. Carefully push up the side under cover into the bumper. 3. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 4. Remove the bulb by turning it onequarter turn counterclockwise. Maintenance 2008 RL 413