2008 Acura RL Owner's Manual - Page 418

Main Menu Table Of Contents Lights, Dust and Pollen Filter, Cleaning the Seat Belts 9. Install the new bulb in the socket by pushing it straight in the socket until it bottoms. 10.Reinstall the socket into the light assembly. Turn it clockwise to lock it in place. 11.Test the lights to make sure the new bulb is working. 12.When reinstalling the taillight assembly, align and pop the snap fasteners in place. Tighten the two mounting bolts and reinstall the trim in place. 13.Tighten the mounting nut securely, and reinstall the maintenance lid. Dust and Pollen Filter This filter removes the dust and pollen that is brought in from the outside through the climate control system. Have your dealer replace the filter when this service is indicated by a maintenance message on the multiinformation display. It should be replaced every 15,000 miles (24,000 km) if you drive primarily in urban areas that have high concentrations of soot in the air, or if the flow from the climate control system becomes less than usual. Cleaning the Seat Belts LOOP Maintenance If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle. Dirt build-up in the loops of the seat belt anchors can cause the belts to retract slowly. Wipe the insides of the loops with a clean cloth dampened in mild soap and warm water or isopropyl alcohol. 2008 RL 415