2008 Acura RL Owner's Manual - Page 440
2008 Acura RL Manual
Page 440 highlights
Main Menu Table Of Contents Changing a Flat Tire WHEEL NUT WRENCH WHEEL NUT WRENCH EXTENSION 6. Loosen each wheel nut 1/2 turn with the wheel nut wrench. 7. Place the jack under the jacking point nearest the tire you need to change. It is pointed to by a mark molded into the underside of the body. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 8. Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground. 9. Remove the wheel nuts, then remove the flat tire. Temporarily place the flat tire on the ground with the outside surface of the wheel facing up. You could scratch the wheel if you put it face down. CONTINUED Taking Care of the Unexpected 2008 RL 437