2006 BMW M5 Owner's Manual - Page 44
2006 BMW M5 Manual
Page 44 highlights
Adjustments gram provides increased lateral support on both sides when driving through a quick succession of alternating curves. Press program button once: > "Comfort" program: one LED > "Normal" program: two LEDs > "Sport" program: three LEDs To switch off: press button longer. You can also activate your preferred program for the active backrest width adjustment of the driver's seat with the button on the steering wheel, refer to MDrive on page 48. Requesting Do not request a position from the memory while the vehicle is moving. There is a risk of accident from unexpected movement of the seat or steering wheel.< Convenience mode 1. Open the driver's door after unlocking or switch on radio readiness. 2. Briefly press the desired memory button 1 or 2. The system immediately cancels the adjustment procedure when you briefly press one of the seat adjustment buttons or one of the memory buttons. Easy entry/exit* To facilitate entry and exit, the backrest width temporarily opens all the way. Safety feature 1. Close the driver's door and switch the ignition on or off. 2. Press the desired memory button 1 or 2 and maintain pressure until the adjustment process has been completed. If the button was pressed inadvertently: press the button again; the LED goes out. Seat, mirror and steering wheel memory Activating with remote control The last positions of the driver's seat, the external rearview mirrors, and steering wheel are stored for the remote key currently in use. You can choose when the position is requested: You can store and request two different positions for the driver's seat and passenger seat*, external rearview mirrors, and steering wheel. The adjustment of the lumbar support is not stored in the memory. > Request when unlocking vehicle > Request when opening driver's door iDrive, for explanation of principle, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Vehicle settings" and press the controller. Storing 1. Switch on radio readiness or ignition, refer to page 53. 2. Set the desired seat, exterior mirror and steering wheel positions. 3. Press the button: The LED in the button lights up. 4. Press the desired memory button 1 or 2: The LED goes out. 42 Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG