2006 BMW M5 Owner's Manual - Page 71
2006 BMW M5 Manual
Page 71 highlights
Displays after completion of trip Malfunction reports generated during the trip are shown consecutively when you switch off the ignition. Before the display disappears, you can display the messages once again. Press the CHECK button for approx. 2 seconds. If several messages are present, you can continue to press the CHECK button to view them in succession. 5. Select a text message and press the controller. The display goes out > automatically after a brief period > when you press the CHECK button again for approximately 2 seconds Speed limit You can enter a speed and a Check Control message indicates when you have reached this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your vehicle speed falls below it again by at least 3 mph/5 km/h. To exit the display: Select the arrow and press the controller. Displaying, setting or changing limit iDrive, for explanation of principle, refer to page 16. 1. Open the start menu. 2. Open "Navigation". Without navigation system*: Open "Car Data". Depending on your vehicle's equipment, the stored Check Control messages are also displayed with the following symbols: No malfunctions are present in the monitored systems. Malfunctions are present in the monitored systems. Depending on the malfunction, supplementary information is shown on the Control Display. The symbols also indicate the status of the service requirements display, refer to page 66. 3. Select "Car Data" and press the controller. 4. Select "Limit" and press the controller. 69 Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG Reference Mobility Communications Entertainment Indication of malfunction urgency Navigation Driving tips Controls At a glance