2006 BMW M5 Owner's Manual - Page 53

Locking safety belt 1. Secure the child restraint system with the belt. 2. Pull out the belt webbing completely. 3. Allow the belt webbing to be pulled in and pull taut against the child restraint system. The safety belt is locked. 4. Hook in the tether strap on the mounting point. Center seat: 1. Fold the center armrest somewhat toward the front. 2. Guide the tether strap through the opening. Unlocking safety belt 1. Open the belt buckle. 2. Remove the child restraint system. 3. Allow the belt webbing to be pulled in completely. Child restraint system with tether strap 3. Fold back the center armrest. 4. Hook in the tether strap on the mounting point. LATCH child-restraint fixing system LATCH: Lower Anchor and Tethers for CHildren. To attach a LATCH child's seat, follow the operating and safety instructions of the child's seat manufacturer.< There are three additional mounting points for child restraint systems with a tether strap, refer to arrows. Fold the corresponding mounting point upward before using. Rear seats Outer seats: 1. Pull the head restraint upward. 2. Guide the tether strap through the bracket of the head restraint. 3. Slide the head restraint into the bottom position. Before attaching the LATCH child's seat, pull the belt away from the region of the childrestraint fixing system. 51 Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG Reference Mobility Placement of tether strap The mountings for the LATCH child's seat fixing system are located at the points marked with the arrows. They are not visible from the outside. Communications Entertainment Navigation Driving tips Controls At a glance