2012 Dodge Challenger Owner Manual - Page 147

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 NOTE: • If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever toward you to switch the headlights back to low beam. Flash-To-Pass You can signal another vehicle with your headlights by • A "Turn Signal On" message will appear in the Elec- lightly pulling the multifunction lever toward you. This tronic Vehicle Information Center (EVIC) and a con- will turn on the high beam headlights until the lever is tinuous chime will sound if the vehicle is driven more released. than 1 mile (1.6 km) with either turn signal on. NOTE: If the multifunction lever is held in the flash-toLane Change Assist pass position for more than 15 seconds, the high beams Tap the lever up or down once, without moving beyond will shut off. the detent, and the turn signal (right or left) will flash Map/Reading Lights three times then automatically turn off. These lights are mounted between the sun visors on the overhead console. Each light is turned on by pressing the lens. Press the lens a second time to turn off the light. These lights also turn on when a door is opened, or when the UNLOCK button on the Remote Keyless Entry (RKE) 3