2012 Dodge Challenger Owner Manual - Page 197

UNDERSTANDING YOUR INSTRUMENT PANEL 195 Vehicles Not Equipped With Keyless Enter-N-Go • Trip B 1. Turn the ignition switch to the ON/RUN position (Do • Elapsed Time not start the engine.) • Display Units of Measure in 2. Fully depress the accelerator pedal, slowly, three times Press the UP or DOWN buttons to cycle through all the within 10 seconds. Trip Computer functions. 3. Turn the ignition switch to the OFF/LOCK position. The Trip Functions mode displays the following. NOTE: If the indicator message illuminates when you • Average Fuel Economy / Fuel Saver Mode - If start the vehicle, the oil change indicator system did not Equipped reset. If necessary, repeat this procedure. Shows the average fuel economy since the last reset. Trip Functions When the fuel economy is reset, the display will read Press and release the MENU button until one of the "RESET" or show dashes for two seconds. Then, the following Trip Functions displays in the EVIC: history information will be erased, and the averaging will continue from the last fuel average reading before the • Average Fuel Economy/Fuel Saver Mode reset. • Distance To Empty The FUEL SAVER MODE message will display above the • Trip A average fuel economy in the EVIC display. This message 4