2012 Dodge Challenger Owner Manual - Page 160
2012 Dodge Challenger Manual
Page 160 highlights
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On some garage door openers/devices there may be a Reprogramming A Single HomeLink Button light that blinks when the garage door opener/device is To reprogram a channel that has been previously trained, follow these steps: in the LEARN/TRAIN mode. NOTE: You have 30 seconds in which to initiate the next 1. Turn the ignition switch to the ON/RUN position. step after the LEARN button has been pressed. 2. Press and hold the desired HomeLink button until 6. Return to the vehicle and press the programmed the EVIC displays "CHANNEL # TRAINING" Do not HomeLink button twice (holding the button for two release the button. seconds each time). The EVIC will display "CHANNEL # 3. Without releasing the button proceed with "ProgramTRANSMIT". If the garage door opener/device activates, ming A Rolling Code" Step 2 and follow all remaining programming is complete. steps. NOTE: If the garage door opener/device does not Programming A Non-Rolling Code activate, press the button a third time (for two seconds) to For programming Garage Door Openers manufactured complete the training. before 1995. To program the remaining two HomeLink buttons, 1. Turn the ignition switch to the ON/RUN position. repeat each step for each remaining button. DO NOT erase the channels.