2012 Dodge Challenger Owner Manual - Page 161

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 2. Place the hand-held transmitter 1 to 3 inches (3 to 5. Press and hold the programmed HomeLink௡ button. 8 cm) away from the HomeLink௡ button you wish to The EVIC will display "CHANNEL # TRANSMIT". If the garage door opener/device activates, programming is program. complete. 3. Simultaneously press and hold both the Homelink௡ button you want to program and the hand-held transmit- To program the remaining two HomeLink௡ buttons, repeat each step for each remaining button. DO NOT ter button. erase the channels. 4. Continue to hold buttons until the EVIC display changes from "CHANNEL # TRAINING" to "CHAN- Reprogramming A Single HomeLink௡ Button To reprogram a channel that has been previously trained, NEL # TRAINED", then release both buttons. follow these steps: NOTE: • It may take up to 30 seconds or longer in some cased 1. Turn the ignition switch to the ON/RUN position. for the channel to train. 2. Press and hold the desired HomeLink௡ button until • If the EVIC displays "DID NOT TRAIN" repeat from the EVIC displays "CHANNEL # TRAINING" Do not Step 2. release the button. 3