2012 Dodge Challenger Owner Manual - Page 202
2012 Dodge Challenger Manual
Page 202 highlights
200 UNDERSTANDING YOUR INSTRUMENT PANEL degree turns (in an area free from large metal or metallic 5. Slowly complete one or more 360-degree turns (in an objects) until the "CAL" message displayed in the EVIC area free from large metal or metallic objects) until the "CAL" message turns off. The compass will now function turns off. The compass will now function normally. normally. Manual Compass Calibration If the compass appears erratic and the "CAL" message Compass Variance does not appear in the EVIC display, you must put the Compass Variance is the difference between Magnetic compass into the Calibration Mode manually as follows: North and Geographic North. To compensate for the differences, the variance should be set for the zone where 1. Turn the ignition switch ON. the vehicle is driven, per the zone map. Once properly 2. Press and release the MENU button until Personal set, the compass will automatically compensate for the differences and provide the most accurate compass headSettings displays in the EVIC. ing. 3. Press the UP or DOWN button until "CALIBRATE NOTE: Keep magnetic materials away from the top of COMPASS" displays in the EVIC. the instrument panel, such as iPod's, Mobile Phones, 4. Press and release the SELECT button to start the Laptops and Radar Detectors. This is where the compass calibration. The message "CAL" will display in the EVIC. module is located, and it can cause interference with the compass sensor, and it may give false readings.