2012 Dodge Challenger Owner Manual - Page 436

434 MAINTAINING YOUR VEHICLE WARNING! A transient high voltage occurs at the bulb sockets of HID headlamps when the headlamp switch is turned ON. It may cause serious electrical shock or electrocution if not serviced properly. See your authorized dealer for service. NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint. 2. Rotate the bulb's socket counterclockwise, and remove the bulb and socket assembly from the housing. 3. Pull the bulb out of the socket and insert the replaceNOTE: On vehicles equipped with HID headlamps, ment bulb. when the headlamps are turned on, there is a blue hue to 4. Install the bulb and socket assembly into the housing, the lamps. This diminishes and becomes more white after and rotate the socket clockwise to lock it in place. approximately 10 seconds, as the system charges. 5. Reinstall the front/rear side marker. Front/Rear Side Marker Lamp Tail/Turn And Stop Lamp 1. Remove the front/rear side marker. Use a fiber stick or similar tool to gently pry the lamp on the outboard side 1. Open the trunk. to disengage the clip. 2. Using a screwdriver, remove the tail lamp retainer.