2012 Dodge Challenger Owner Manual - Page 196
2012 Dodge Challenger Manual
Page 196 highlights
194 UNDERSTANDING YOUR INSTRUMENT PANEL • Press Brake & Push Button to Start position or cycle the ignition to the ON/RUN position if equipped with Keyless Enter-N-Go. To turn off the • Push Button or Insert Key/Turn To Run (refer to message temporarily, press and release the MENU but"Remote Starting System" in "Things To Know Before ton. To reset the oil change indicator system (after Starting Your Vehicle") performing the scheduled maintenance) refer to the following procedure. • 1-4 SKIPSHIFT Engine Oil Change Indicator System Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The "Oil Change Required" message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN Vehicles Equipped With Keyless Enter-N-Go 1. Without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/ RUN position (Do not start the engine.) 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Without pressing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position.