2012 Dodge Challenger Owner Manual - Page 361

WHAT TO DO IN EMERGENCIES 359 • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the • Replace the TIREFIT Sealant Bottle (1) and Sealant TIREFIT kit. Hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the sys- • You can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles, located in tem. Refer to "Sealing a Tire with TIREFIT" section (F) the Accessory Storage Compartment (on the bottom of "Sealant Bottle and Hose Replacement". the air pump) for inflating sport balls, rafts, or similar • The Sealant Bottle (1) and Sealant Hose (6) are a one inflatable items. However, use only the Air Pump tire application use. After each use, always replace Hose (7) and make sure the Mode Select Knob (5) is in these components immediately at an authorized the Air Mode when inflating such items to avoid dealer. injecting sealant into them. The TIREFIT Sealant is • When the TIREFIT sealant is in a liquid form, clean only intended to seal punctures less than 1⁄4 in (6 mm) water, and a damp cloth will remove the material from diameter in the tread of your vehicle. the vehicle or tire and wheel components. Once the • Do not lift or carry the TIREFIT kit by the hoses. sealant dries, it can easily be peeled off and properly discarded. TIREFIT Usage Precautions 6