2012 Dodge Challenger Owner Manual - Page 36

34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Place the Key Fob in the ignition switch. KEYLESS ENTER-N-GO The Passive Entry system is an enhancement to the 3. Within 15 seconds, cycle the ignition switch between vehicle's Remote Keyless Entry (RKE) system and a OFF and ON/RUN and then back to OFF four times feature of Keyless Enter-N-Go. This feature allows you to ending up in the LOCK position. However, do not start lock and unlock the vehicle's door(s) without having to the engine. press the RKE transmitter lock or unlock buttons. 4. Within 30 seconds, press the power door UNLOCK NOTE: switch to unlock the doors. • Passive Entry may be programmed ON/OFF; refer to "Electronic Vehicle Information Center (EVIC)/ 5. A single chime will indicate the completion of the Personal Settings (Customer-Programmable Feaprogramming. tures)" in "Understanding Your Instrument Panel" for NOTE: If you do not hear the chime, it means that the further information. system did not enter the programming mode and you • If a Passive Entry door handle has not been used for will need to repeat the procedure. 72 hours, the Passive Entry feature for the handle may 6. Repeat these steps if you want to return this feature to time out. Pulling the deactivated front door handle its previous setting. will reactivate the door handle's Passive Entry feature. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.